Universal Concrete Sealer - 5L

• For new surfaces leave up to 7 days after new concrete is laid. Ensure the surface is clean and thoroughly dry.
• For old surfaces fully clean off with power wash, ensure surface is free of stains and debris.
• Allow to thoroughly dry prior to application. This may take several days.
• Do not be tempted to power wash in the morning and apply sealant in the same day.
• Can be applied by course droplet low level, chemical resistant sprayer, soft bristled brush or roller. (Do not use plastic coloured brushes)
• Avoid excess pooling and over coating.
• Ensure expansion joints are well cleaned and allowed to thoroughly dry.
• Tints can be used but are not recommended unless they have been applied in the past or there is an issue with bare concrete visible.

• For new surfaces Sealants should never be applied to freshly laid paving. It usually takes at least 3 or 4 months for the jointing sand to properly settle and for any efflorescence to disappear. We recommend that you do not seek to get your paving sealed for at least 6 months after installation. Should it be sealed too soon, you will be sealing in any problems and the application of sealant cannot easily be reversed.
• For old surfaces fully clean off with power wash, apply premium weed and moss inhibitor. Allow to dry thoroughly (a minimum of 3-4 days of completely dry weather) and re-apply jointing sand prior to sealant application.
• Ensure the entire area is completely dry, clean and free of debris.
• Remove all traces of weeds, algae stains, lichen and any other old stain.
• Ensure no sand remains on the surface of the blocks.
• On occasion, washing or pressure cleaning will cause reactive efflorescence and substrate saturation. Therefore allow at least 2 weeks between cleaning and application of sealant to allow to dry out and to check for reappearance.

• Gloss Sealant SDS
• High Gloss Sealant SDS
• Matt Sealant SDS
• Satin Sealant SDS
• Ultra Sealant SDS
• Concrete Sealant Technical Data Sheet - Application

Delivery

All deliveries must be signed for (except items sent by post and which are small enough to be put through your letterbox). Please make sure you keep the receipt enclosed with your goods. When you add products to your Shopping Basket, the appropriate delivery charge will be added automatically. You will always be able to see this charge before submitting your order. All delivery timescales are subject to product and delivery slot availability. Small parcels may be delivered via Royal Mail. Delivery is next working day subject to availability. However, delivery may take up to five working days.

Returns

If you need to return a product purchased from Multicrete then you have 28 days to do so.  The returned goods must be in a resalable state and any goods or accessories that accompany the returned product must also come back to us.

• The goods should also be returned with their original box, packing and accessories.
• Any products which have been manufactured to order will incur a 15% restocking fee.
• If the return is due to missing or faulty parts, then we will offer a full refund or replacement provided we are aware of this within 14 days.
• Any refund, which is due to a fault or other defect, will include a refund of the applicable delivery charge.
• Make sure you obtain a proof of postage. Returns sent by post are at your own cost.

All pallet orders paid and taken before 12.30pm will be dispatched on the same day on a next day service, this excludes weekends. We request that the courier contacts you approximately one hour before the pallet delivery. All pallet deliveries to residential address are kerb side drops.

Please view our full delivery and returns policy for further information.