Due to COVID - 19 Please note that deliveries are taking longer than usual due to the courier working on skeleton staff, please keep checking the tracking information for updates on your delivery.

Universal Concrete Sealer - Matt (5L)

£17.49 (ex. VAT)
Our Universal Concrete Sealer is a high quality acrylic solvent based clear sealer, designed to protect concrete by repelling water, dirt, oil and fuel, whilst enhancing the concrete based area.

Multicrete Universal Concrete Sealer is a high quality acrylic solvent based clear sealer, designed to protect and enhance concrete areas by repelling water, dirt, oil and fuel. 


  • Ready for use no dilution required
  • Surface dry in 1-2 hours
  • High Solids
  • Enhances concrete drives and patios

  • 2-4 square metres per litre depending on the substrate, porosity of surface and application method. Some porous or neglected surfaces may require more than a single coat.
  • For new surfaces - leave up to 7 days after new concrete is laid. Ensure the surface is clean.
  • For old surfaces - fully clean off with power wash. Allow to thoroughly dry prior to application
  • Can be applied by course droplet low level, chemical resistant sprayer, soft bristle brush or roller
  • Avoid excess pooling and over coating
  • Do Not apply when ground temperatures are below 5 degrees
  • Do not apply to damp or wet surfaces
  • Do not apply when rain is imminent or if efflorescence is present
  • Do not walk on treated area until dry
  • Do not park vehicles on treated surface for 24-48 hrs
  • Do not use on clay surfaces
  • Inclusion of additives such as colour tints, pigments and anti-slip agents may affect final finish
  • Weight: